Custom Paper Generator: Graph, Dot, Lined, Isometric and Hex Paper PDFs
Create a sheet for a specific job: a 5 mm graph for plotting, quarter-inch squares for a scale drawing, dots for a notebook, or blank music staves. Set the page, pattern and spacing, inspect the preview, then download a vector PDF or SVG. Calculations and file generation happen in your browser.
Make your sheet
The pattern is generated in your browser and can be downloaded as vector PDF or SVG. No account or document upload is needed. Vector geometry stays sharp when scaled, but changing the print scale changes the physical grid spacing.
Choose settings in this order
- Paper: choose the physical stock you will load. Custom dimensions describe the finished page, not the printer’s supported media.
- Pattern and spacing: check the field label because its meaning changes with the pattern.
- Margins: leave room supported by your printer and for any binding or cutting. A default margin is a layout choice, not a device guarantee.
- Visibility: choose a colour and weight you can read comfortably on a trial print.
- Reference: keep the 50 mm check bar enabled when physical scale matters. A page too narrow for the bar produces a warning instead of a cropped reference.
What the spacing field measures
| Pattern | Meaning | Example |
|---|---|---|
| Square grid | Distance between neighbouring line centres | 5 mm: ten intervals span 50 mm. |
| Dots | Centre-to-centre distance in each direction | 6.35 mm: four intervals span one inch. The weight field becomes dot diameter. |
| Lined | Distance between writing baselines | 8 mm is the spacing of our ready-made lined sheets. |
| Isometric | Side of an equilateral triangle | 10 mm side: perpendicular row spacing is about 8.66 mm. |
| Hexagonal | Side length, not overall hexagon width | 5 mm side: 10 mm corner-to-corner and about 8.66 mm across opposite flat sides. |
| Music | Gap between adjacent lines within one staff | 2 mm: a five-line staff spans 8 mm from first to fifth line. |
Worked example: quarter-inch graph paper
Select your paper, choose Square grid and enter 6.35 mm. This uses 25.4 ÷ 4 = 6.35 mm per quarter inch. Download the PDF and print at Actual Size. Four intervals should span one inch; ten intervals should span 63.5 mm. Measure a sample before using it for a drawing whose dimensions matter.
PDF, SVG and the print result
PDF stores an explicit physical page box. SVG is useful for editing the vector artwork; confirm that your editor preserves its millimetre dimensions when importing. Enlarging either file enlarges its spacing. Vector artwork avoids raster pixelation, but it does not guarantee a printer’s sharpness or scale.
The preview shows proportions, not actual size on your screen. The tool also reserves space for optional labels and the check bar. It limits extremely dense dot and hexagon patterns to keep the preview responsive; increase spacing or reduce page size if a density warning appears.
Measure before printing a batch
If a 50 mm bar measures 47 mm, the observed scale is 94%. Confirm paper size and scaling in both the application and driver. If measurements differ by direction, use the two-axis print check. Centring a grid in the file does not establish front-to-back registration when duplex printing.
The tool does not upload the dimensions or documents you generate. Loading this page still makes ordinary website requests; see the privacy explanation.
Sources and alternatives
Unit conversion uses 25.4 mm per inch. Print-scale instructions follow Adobe’s page-sizing documentation. Pattern geometry and code are PaperGridly’s implementation, not a certification by those sources.
For a ready-made file, use 5 mm graph paper, dot grid, lined paper or music staff paper.