Printable 5 mm Dot Grid Paper: A4 and Letter PDFs
Download 5 mm dot grid as a one-page PDF for A4 or US Letter. Choose the file matching the paper in your printer so the pattern can retain its intended dimensions.
File specification and downloads
Dot centres are 5 mm apart horizontally and vertically. Each dot has a digital diameter of 0.44 mm. The light pattern is intended as a guide for writing and small layouts.
Reserve space for a weekly layout
Seven columns with five 5 mm intervals each require 7 × 25 = 175 mm. Adding six 5 mm gutters would bring the width to 205 mm, too wide for the supplied portrait A4 pattern. Reduce the intervals per column, omit separate gutters or generate a wider landscape sheet. Count spaces between dots, not the number of dots.
Dot spacing and printed dot visibility are separate
Reducing the PDF to fit a different sheet shrinks the spacing and the dots. Increasing darkness in the generator can improve visibility, but paper, driver and printer quality also affect the result. Do not describe a faint sample as proof that the spacing is wrong.
Print and verify one copy
- Open the matching A4 or Letter PDF and check the paper size in the print dialog.
- Select Actual Size or 100%. Disable Fit, Shrink, borderless expansion and any second driver scaling control.
- Print one sheet before making a batch. Measure from the centre of one dot to the centre of the eleventh dot in a row: ten intervals should span 50 mm. Repeat vertically if the layout must preserve both axes.
- If an edge is clipped, use a supported sheet or layout with enough inset. Fit may avoid clipping, but it also changes the stated pattern dimensions.
The files use 15 mm side insets and reserve space for the heading and bottom reference. They are free to download without a sign-up. The Letter and A4 patterns can contain different numbers of rows because the sheets have different proportions.
Digital file check — 2 November 2026: both PDFs were checked for a one-page document, the stated page dimensions and the pattern geometry, then rendered for visual inspection. These checks concern the files. We have not physically tested your printer or certified its output accuracy.
Sources and method
- Adobe Acrobat: adjust page size for printing: Actual Size, Fit and the difference between the page and the printable area.
- NIST: SI units of length: the exact conversion of one inch to 25.4 millimetres. Inch and point values below are calculated from the stated nominal dimensions.